YN-565EX III, it's a upgraded flash, compared to the second version YN-565EX II, we added some new functions:
Supports Firmware Upgrade
The YN565EX III is equipped with the USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite.
High Speed Recycling System
The recycling time for full output just takes 2 seconds; you can get high speed current-return experience even without using brand new batteries, which will only takes 3-4 seconds.
Support the Battery Remaining Power Real-time Display
The YN565EX III is equipped with the battery electric power display function, allows you to check the battery remaining capacity easily.
Compatible With C and N’s Optical Transportation Wireless Slave Flash
One YN565EX III can respectively accept the master unit of YN600EX-RT II、YN568EX II、YN568EX III、600EX(II)-RT、580EX II、SB910/900/800/700,Nikon internal flash and Canon commander and wireless signal of 7D/60D/600D,realizes external TTL and manual flash and stroboscopic flash.
TTL Flash with High Guide Number
GN58@ISO100，105mm, support TTL, M, Multi flash. .
Sound Prompt System
When the sound prompt system is enabled，different sound modes will prompt different working conditions of the speedlite so as to allow you to focus on shooting process.
Equipped with the AF-assist Beam Emitter
The YN565EX III is equipped with the AF-assist beam emitter, allows you to focus easily in dark environment.
Supports Electric Zooming（24~105mm）
Supports automatic and manual zooming, the focal length can be varied between 24～105mm.
Multiple Trigger Mode Supported
YN565EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera.
Automatic Settings Saving,supports custom settings (Fn)
Equipped with Large-size LCD display and standard 2.5mm PC interface
1. Ultra-Long-Range Wireless flash ( Indoor : 25m, ourdoor: 15m )
2. Flash Exposure Compensation
3. Rear-Curtain Sync
5. FE Lock
6. Advanced Setting
7. The use of external Flash Pack
8. High-Speed continuous Shooting
9. Reflection Flash
10.Using Reflection Board to take photoes
11.Use wide-angle Diffuser
Suitable Camera and Flashes in Wireless TTL Slave mode:
Camera: Canon 7D, 60D, 600D
Flash: Canon 580EX II, Nikon Nikon SB-900, SB-800, SB-700
Suitable Camera in TTL function:
Canon 5D, 7D, 6D, 7DII. 30D, 50D 450D 500D 550D 600D 650D 700D 750D 800D 1300D 1200D 1100D 1000D
Canon Rebel XS XSi XTi T1i T2i T3
Suitable Camera in S1 / S2 mode:
Any DSLR camera with standard hot shoe
Suit for Yongnuo YN622C, YN622C II, YN622C KIT
|Circuit design||Insulated Gate Bipolar Transistor (IGBT)|
|Guide No.||58 meters (ISO 100, 105mm)|
|Wireless trigger||N’s & C’s wireless system, S1, S2 pre-flash-canceled mode|
|Wireless triggering distance||20~25m indoor, 10~15m outdoor|
|Slave groups||3（A, B, and C）|
|Vertical rotation angle||-7~90 degrees|
|Horizontal rotation angle||0~270 degrees|
|Power supply||4×AAsize batteries (Alkaline or Ni-MH are usable)|
|Lighting times||100~1500 times (AA alkaline cell used)|
|Recycle time||approx 3s (AA alkaline cell used)|
|Flash control||8 levels of output control (1/128~1/1), 22 levels of fine tuning|
|External interface||hot shoe, PC port and eternal charging port|
|External power||YONGNUO External Flash Pack like SF-18C, SF-17C|
|Wireless triggering distance||20~30m indoor,10~15m outdoor|
|Additional features||Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection|
|Dimensions||60×190×78mm (Extended state)|
Flash Output :
|Flash Coverage (mm)|
Note: Yongnuo YN-565EX doesn't support Master mode and High- Speed Synchronous.
1 x YN-565EX III for Canon
1 x Mini Stand
1 x Free Diffuser Cover
1 x Manual in English and Chinese
1 x Original box